Reading the latest movement
In September 2026, the capacity utilization was 76.85%, up 0.43 percentage points from August 2026 and up 0.80 percentage points from September 2025. Across 717 readings since January 1967, the average is 79.80%, and the latest reading is higher than 25% of them. The average since January 2017 is 76.69%.
A difference between periods describes economic change in this edition of the data; a later revision of either observation is a separate event.
What the capacity utilization tells you
Capacity utilization is the percentage of estimated sustainable industrial capacity that U.S. factories, mines and utilities are actually using.
Capacity utilization is a gauge of slack or strain in the industrial sector. When plants run close to their sustainable limits, firms face bottlenecks, overtime and pressure to raise prices, so the Federal Reserve and inflation analysts have long watched the rate as a signal of potential cost pressure. Low utilization indicates idle equipment and room to expand output without much new investment.
The rate also informs capital spending. Businesses are more likely to invest in new plant and equipment when existing facilities are heavily used, so equipment suppliers and investment analysts follow utilization in specific industries. During recessions the rate typically drops sharply, giving a clear picture of how much industrial capacity has gone unused and how long recovery to earlier operating levels takes. Industry-level rates, such as those for primary metals or chemicals, are followed by firms deciding whether to expand plants.
How to read it
- Read the level, not the percent change. The question is where utilization sits relative to its own history, which is why comparisons with the long-run average are standard.
- The link to inflation is looser than it once was. Global supply chains and imports mean domestic factory strain does not translate as directly into U.S. prices, so treat high utilization as one signal among several.
- Industry detail matters. Utilities swing with weather, and mining with energy prices, so check manufacturing utilization separately for a cleaner reading on factory demand.
- Capacity is estimated from surveys and output trends, and those estimates are revised. A change in the rate can reflect revised capacity as well as changes in output.
What moves it
Utilization rises when output grows faster than capacity, and falls when output weakens or capacity expands. Over the business cycle, demand for goods drives most of the movement, because capacity changes slowly through investment and plant closures. Long periods of weak investment can push utilization up even with modest output growth, while waves of new plant construction can hold it down. Weather moves the utilities rate, and energy prices affect mining capacity use.
Records and long-run averages
Computed from every published monthly reading in this edition, January 1967 to September 2026. Records reflect the acquired history only; earlier data published elsewhere is not included.
| Measure | Value | When / basis |
|---|---|---|
| Latest | 76.85% | September 2026 |
| Record high | 89.39% | January 1967 |
| Record low | 64.08% | April 2020 |
| Long-run average | 79.80% | Median 79.73% · January 1967 onward |
| Average since 2017 | 76.69% | Last ten calendar years |
| Latest percentile | 25th | Share of readings below the latest |
Year-by-year summary
Calendar-year average, range and final reading of the published level. A year marked partial includes only the months published so far.
| Year | Average | Low | High | Last reading |
|---|---|---|---|---|
| 2026 partial | 76.12% | 75.24% | 76.85% | 76.85% September 2026 |
| 2025 | 75.95% | 75.39% | 76.40% | 75.64% December 2025 |
| 2024 | 76.10% | 75.17% | 76.80% | 75.87% December 2024 |
| 2023 | 77.34% | 76.85% | 77.89% | 76.86% December 2023 |
| 2022 | 78.49% | 77.13% | 79.04% | 77.13% December 2022 |
| 2021 | 76.92% | 73.57% | 78.56% | 78.37% December 2021 |
| 2020 | 72.31% | 64.08% | 76.78% | 75.39% December 2020 |
| 2019 | 77.87% | 76.91% | 79.10% | 77.04% December 2019 |
| 2018 | 79.23% | 77.91% | 79.93% | 79.71% December 2018 |
| 2017 | 76.39% | 74.93% | 77.85% | 77.85% December 2017 |
| 2016 | 75.43% | 74.95% | 76.12% | 75.44% December 2016 |
| 2015 | 77.12% | 75.72% | 78.58% | 75.72% December 2015 |
Readings around recent recessions
Values of the published level at each NBER business-cycle peak and trough inside this history, with the range from the peak through twelve months after the trough. Shaded bands on the chart mark the same NBER recession dates.
| Recession (peak to trough) | At peak | At trough | Low in window | High in window |
|---|---|---|---|---|
| February 2020 to April 2020 | 76.78% | 64.08% | 64.08% April 2020 | 76.78% February 2020 |
| December 2007 to June 2009 | 81.14% | 66.51% | 66.51% June 2009 | 81.14% December 2007 |
| March 2001 to November 2001 | 78.25% | 73.93% | 73.76% December 2001 | 78.25% March 2001 |
| July 1990 to March 1991 | 82.70% | 78.76% | 78.76% March 1991 | 82.85% August 1990 |
Recession dates: NBER Business Cycle Dating Committee. A reading at a peak or trough month is not a forecast signal on its own.
Put the latest level in context
These comparisons use published levels in this snapshot, with matching reference periods. Rate differences use percentage points; growth of a rate is not a percentage-point difference. The chart above may use a different transformation.
| Earlier period | Earlier level | Latest level | Absolute difference | Relative change |
|---|---|---|---|---|
| September 2025 | 76.046 | 76.850 | 0.804 pp | 1.06% |
| September 2021 | 76.887 | 76.850 | -0.037 pp | -0.05% |
| September 2016 | 75.315 | 76.850 | 1.536 pp | 2.04% |
How have prices, jobs and output changed since 2019? · Research questions and worked comparisons.
Definition and limitations
Capacity is estimated rather than a fixed physical ceiling. This is an industrial measure, not the share of all U.S. economic resources in use.
Percentage growth is calculated from matching series levels. Both endpoints retain the same adjustment basis. Growth computed from rounded source inputs can differ from the agency’s published headline rounding.
Which measure fits your question? Compare definitions and complementary measures before drawing a conclusion.
Release schedule and revisions
The Federal Reserve Board publishes capacity utilization alongside industrial production in the monthly G.17 release, Industrial Production and Capacity Utilization, around the middle of the month. Revisions to output data change recent utilization rates, and annual revisions update capacity estimates using survey data, so historical rates can shift.
See the producer's release page for the next publication.
Read it alongside
- Industrial production: Industrial production is the numerator of the utilization rate, showing whether changes come from output or capacity.
- Producer prices: final demand: Producer prices help test whether high utilization is translating into cost and price pressure for industrial goods.
- Unemployment rate: The unemployment rate measures slack in labor, complementing utilization's measure of slack in industrial equipment.
Frequently asked questions
Can capacity utilization reach 100 percent?
In principle it can, but in practice it rarely approaches it. The Federal Reserve defines capacity as the greatest level of output a plant can sustain within a realistic work schedule, allowing for normal downtime and maintenance. Short-term output above that sustainable level is possible, but sustained operation near the theoretical maximum is not typical.
How does the Federal Reserve estimate capacity?
The Fed combines survey data on plant utilization, such as the Census Bureau's Quarterly Survey of Plant Capacity Utilization, with physical capacity data for some industries and trends in output and capital investment. Industry capacity estimates are then aggregated. Because the inputs are estimates, capacity and utilization are revised as source data improve.
Does capacity utilization cover the whole economy?
No. It covers only manufacturing, mining, and electric and gas utilities. Service businesses such as hospitals, airlines or software firms are not included, even though some of them have capacity constraints. For economy-wide slack, analysts use measures such as the output gap and the unemployment rate.
Transformations
The published level keeps the source unit. Year-over-year change compares with the same period a year earlier (52 weeks for weekly data); previous-period change compares with the preceding observation, in percentage points when the series is already a rate. No frequency conversion, interpolation or hidden rescaling is applied. Formulas and methods.
Source and methodology
Producer documentation · Acquisition endpoint / file · Producer release information
Revisions and archived snapshots
Earlier site acquisitions are archived. Matching unchanged series identities can be compared between versions; this is not a complete agency vintage history. Previous-period readings above come from the same acquired snapshot. The revision comparison separates changes to matching historical observations from new coverage and corrected series identities. Earlier agency vintages remain outside this archive. Read the revision policy and download this frozen snapshot.